Fluorescent, CFL and HID
Straight and U-bend tubes, CFLs, metal halide, high pressure sodium and mercury vapor lamps. EPA lists all of them as universal waste lamps. Lamp recycling
Lamp recycling information for Selma, AL.
This page covers lamp recycling information for Selma, AL; it does not confirm service availability. Send your ZIP and counts. A written quote will confirm whether pickup or mail-back is available.
- Fluorescent, CFL and HID
- Ballasts and batteries
- Availability checked by ZIP
- A record for every job
Alabama rules
The Alabama lamp rules that apply in Selma.
Selma sits in Dallas County, Alabama. These rows come from Alabama agency, statute or EPA pages we read; the federal baseline fills any gap.
| Topic | What applies | Source |
|---|---|---|
| Business lamps | Businesses generating more than 100 kg of hazardous waste a month must manage spent lamps either as hazardous waste or as universal waste under ADEM Admin. Code chapter 335-14-11. | Alabama Department of Environmental Management, Hazardous Waste Management:... |
| Household lamps | ADEM notes most Alabama solid waste disposal facilities will not accept hazardous lamps for disposal, with an exception for lamps from household sources. | Alabama Department of Environmental Management, Hazardous Waste Management:... |
| Crushing lamps | Lamps may be crushed only for volume reduction under specific requirements, and broken or crushed lamps must then be managed as hazardous waste, not universal waste. | Alabama Department of Environmental Management, Hazardous Waste Management:... |
| Universal waste | EPA's state table lists lamps in Alabama's universal waste program. | EPA, Universal Waste Programs in the United States |
| Federal baseline | Under federal rules, business lamps can be managed as universal waste under 40 CFR Part 273. That means closed containers that prevent breakage, a label, and no more than one year in storage. | 40 CFR Part 273 |
| Regulator | Alabama Department of Environmental Management (ADEM). | Alabama Department of Environmental Management, Hazardous Waste Management:... |
Scroll the table sideways to see every column.
Read from the sources named, October 3, 2026. Rows appear only where a source was verified. Federal rules shown where noted. States can be stricter. Not legal advice.
What we take
Three streams, one quote.
PCB and non-PCB
EPA says ballasts made before July 2, 1979 may contain PCBs. We keep pre-1979 and unlabeled ballasts apart from the rest of the load. Ballast recycling
By chemistry
EPA asks that lithium batteries be bagged one per bag or have their terminals taped. We collect them with your lamps. Battery recycling
How it works
Four steps from Selma storage room to recycling record.
Count by type
Rough counts are enough: four-foot tubes, eight-foot tubes, CFLs, HID lamps, ballasts and batteries.
Send the form
Add your ZIP code. We review availability and include any available service method in a written quote.
Pack and label
Keep every lamp whole. Alabama allows crushing only with conditions. Close and label each container, and keep ballasts and batteries apart.
Keep the record
Every job ends with a recycling record that shows what was collected and that it went to a permitted recycler.
Selma questions
What Selma facilities teams ask.
Can a business in Selma put fluorescent tubes in the trash?
Businesses generating more than 100 kg of hazardous waste a month must manage spent lamps either as hazardous waste or as universal waste under ADEM Admin. Code chapter 335-14-11. Send counts from your Selma site and we reply with a written quote.
Can lamps be crushed in Alabama?
Lamps may be crushed only for volume reduction under specific requirements, and broken or crushed lamps must then be managed as hazardous waste, not universal waste. Whole lamps are the simpler path: they ship as universal waste and keep their mercury inside until the recycler captures it.
How much does lamp recycling cost in Selma?
We reply with a written quote based on your counts and ZIP code. Public contracts price lamps by the foot, by the lamp or by the pound, often with a minimum charge per pickup. Our pricing page explains each unit.
Can you collect from a Selma site?
Send your ZIP code and rough counts with the form. We check whether pickup or mail-back is available there before quoting. A city page is not a service guarantee. Every completed job ends with a recycling record.
Federal rules shown where noted. States can be stricter. Not legal advice.
More near Selma.
Lamps waiting at a Selma site?
Send rough counts and your ZIP. The written quote will confirm whether pickup or mail-back is available for that location.